 |
♦ Totally closed circulating cooling, to prevent the pipeline blockage caused by sundries.
♦ Adopt soft water circulation cooling to prevent power supply, thyristor, capacitor, IGBT module, induction coil and other overheating damage caused by scale formation.
♦ No need to dig water pool, small land occupation, convenient movement and low cost.
♦ High heat dissipation efficiency and low operation cost.
♦ The closed circulating water consumption is small, which meets the requirements of environmental protection and energy saving.
The traditional way of cooling for high, medium frequency and super audio frequency induction equipment is to excavate a certain amount of water pool or use open cooling water tower to cool directly with hard water, which often causes scaling on the water pipe wall due to poor water quality, gradually reducing or even blocking the circulating water flow, thus causing component damage (such as: electronic tube, thyristor, reactor, capacitor, IGBT module, induction coil, etc.
♦ In our company's maintenance of medium and high frequency induction heating equipment, it is concluded that the equipment failure caused by water accounts for about 80% of the equipment damage. If the quality of cooling circulating water is improved and the equipment is cooled sufficiently, the failure rate of equipment will be reduced by 80%.
♦ Our company has successfully developed FBN series closed water cooling system for the above problems.
♦ Totally closed circulating cooling, to prevent the pipeline blockage caused by sundries.
♦ Adopt soft water circulation cooling to prevent power supply, thyristor, capacitor, IGBT module, induction coil and other overheating damage caused by scale formation.
♦ No need to dig water pool, small land occupation, convenient movement and low cost.
♦ High heat dissipation efficiency and low operation cost.
♦ The closed circulating water consumption is small, which meets the requirements of environmental protection and energy saving.
The traditional way of cooling for high, medium frequency and super audio frequency induction equipment is to excavate a certain amount of water pool or use open cooling water tower to cool directly with hard water, which often causes scaling on the water pipe wall due to poor water quality, gradually reducing or even blocking the circulating water flow, thus causing component damage (such as: electronic tube, thyristor, reactor, capacitor, IGBT module, induction coil, etc.
♦ In our company's maintenance of medium and high frequency induction heating equipment, it is concluded that the equipment failure caused by water accounts for about 80% of the equipment damage. If the quality of cooling circulating water is improved and the equipment is cooled sufficiently, the failure rate of equipment will be reduced by 80%.
♦ Our company has successfully developed FBN series closed water cooling system for the above problems.
